Kitchen sink drains slow or backs up
We pull the trap, snake the branch, and hydro jet the grease off the pipe wall. Most kitchen lines clear in 45 to 90 minutes. We camera it after so you know the wall is clean, not just punched through.
We clear the fat, soap scum, and sludge that choke your drains.
Grease and Soap Buildup Removal Port Charlotte FL
Grease and Soap Buildup Removal Port Charlotte FL is what we do every day. If your kitchen sink drains slow, your shower pan holds water, or you smell that sour drain odor, the line is coated with fat and soap scum. We cut it out, flush it clean, and show you the camera footage before we leave. Same-day service across Charlotte County.
Fast online booking
Request service today
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now (941) 307-1926 → No spam. No obligation. Just practical help.
Careful work. Honest options.
About this service
Grease and Soap Buildup Removal Port Charlotte FL
Grease and Soap Buildup Removal Port Charlotte FL is a drain cleaning service that cuts fat, oil, soap scum, and sludge out of kitchen, bath, and main lines so water flows free again. Grease cools inside the pipe and grabs soap film, hair, and food bits until the line closes down to a pencil-width channel. We run a drain snake or hydro jetting machine through it, then camera the pipe to confirm the walls are clean. Most kitchen lines take 45 to 90 minutes.
Port Charlotte homes deal with this year-round because we cook with oil, run dishwashers daily, and use hard water that leaves soap scum behind. In rentals near Murdock Village and Deep Creek, we often find grease buildup in kitchen drains Port Charlotte FL that has been growing for months. If you need grease and soap buildup removal in Port Charlotte FL near me, call (941) 307-1926 and we will be there the same day.
- ✓ Fast Same-Day Flow
- ✓ No More Recurring Clogs
- ✓ Protects Your Pipes
- ✓ Stops Odor and Gurgling
What's included
What Our Grease and Soap Buildup Removal Includes
Every job includes the full clear-and-verify process, not just a quick snake. Here is what is covered on a standard grease and soap buildup removal visit, and what we treat as an add-on when the line needs more work.
✓
Fixture and Trap Inspection
We pull the P-trap, check the fixture drain, and look for soap scum buildup at the sink, shower, or tub. This tells us whether the clog is local or already in the branch or main line. Takes 10 to 15 minutes.
✓
Mechanical Clog Clearing
We run a drain snake, plumbing auger, or rooter machine through the line to break the core of the grease clog. This is included on every job. If the line needs hydro jetting instead, we tell you before we switch tools.
✓
Hydro Jetting of Grease Walls
For heavy buildup we jet the pipe at 3,000 to 4,000 PSI with a rotating nozzle. This scours grease and soap scum off the full pipe wall. It is the step that stops the clog from coming back in a few weeks.
✓
Sewer Camera Verification
A pipe inspection camera goes down the line before and after. You see the grease, then you see the clean pipe. We record it so you have proof of the work and a baseline for next time.
✓
Full Fixture Flush and Test
We fill and drain every fixture on that branch, including the dishwasher or washing machine if it ties in. If anything is still slow, we keep working. We do not leave until the line pulls fast.
✓
Prevention Walkthrough
We show you what to stop putting down the drain and how often to run hot water through the line. For restaurants, we recommend a grease trap service schedule. Small habits add years to the pipe.
How it works
How Our Grease Removal Process Works
01
Phone Diagnosis
You tell us which drains are slow and how long it has been happening. We ask about the kitchen sink, dishwasher, and laundry. That tells us whether this is a single fixture or a main line problem. Most calls take five minutes, and we give you a price range before we roll.
02
On-Site Inspection
Our tech pulls the P-trap, checks the branch line, and looks for soap scum buildup at the fixture. On commercial kitchens we check the grease trap cleaning equipment and the trap level. This step takes 10 to 15 minutes and tells us which tool to run.
03
Mechanical Clearing
We feed a drain auger cable or a rooter machine through the line to break the core of the clog. For heavy grease we switch to a hydro jetting machine and a hydro jetting hose. This is the step that actually removes the buildup instead of poking a hole in it.
04
Camera Verification
A pipe inspection camera goes down the line so you can see the pipe walls on the monitor. We look for remaining grease, tree root intrusion, or a cracked pipe. If the walls are still coated, we jet again. No guessing, no 'it should be fine'.
05
Flush and Test
We run hot water through every fixture on that branch, then fill the sink and let it drain. If it holds and pulls fast, we button it up. We leave the work area clean and tell you what to avoid so the grease does not come back.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Hydro Jetting Machine
Runs water at 3,000 to 4,000 PSI through a hydro jetting hose and rotating nozzle to scour grease and soap scum off the full pipe wall. This is our main tool for heavy buildup.
RIDGID Drain Cleaning Machine
Powers a drain auger cable through branch lines and mains to break the core of a clog. We use it on kitchen, bath, and laundry lines where jetting is not needed.
Spartan Tool Rooter Machine
Cuts through grease, sludge, and tree root intrusion in main lines. We match the cutter head to the pipe material so we do not damage cast iron pipe or PVC pipe.
Pipe Inspection Camera
Goes down the line before and after the job so you can see the grease and then the clean pipe. It also catches cracked pipe, offset joints, and root intrusion.
General Pipe Cleaners Auger
A plumbing auger for tight fixtures and short runs. We use it on bathroom sinks, tubs, and showers where a full machine will not fit or is not needed.
Sewer Camera
A larger camera for main sewer line work. It shows the full run to the city connection, including any belly in the line or root intrusion at a joint.
Real results
Before and after.
Kitchen Sink Cleared in Deep Creek
Before
A homeowner in Deep Creek had a kitchen sink that took 20 minutes to drain. The dishwasher backed up into the sink, and there was a sour odor under the cabinet. The line had been slow for two months.
After
We pulled the trap, snaked the branch, and jetted the grease off the pipe wall at 3,500 PSI. The camera showed a clean pipe. The sink now drains in under 10 seconds, and the odor is gone.
Restaurant Grease Line Jetted Overnight
Before
A restaurant near Port Charlotte Town Center had a three-compartment sink and floor drain backing up during dinner service. Grease had built up over months, and the grease trap was near capacity.
After
We cleared the grease line and floor drain with a hydro jetting machine, then checked the grease trap cleaning equipment. The kitchen was back in service the same night. Flow was restored to full capacity.
Rental Main Line Restored in Harbour Heights
Before
A property manager in Harbour Heights had three rentals with slow drains. One unit had a main line that backed up when the laundry ran. Tree roots had entered a joint and grabbed grease to form a mat.
After
We cut the roots with a rooter machine, jetted the main line, and camera-verified the full run. All three units drain properly now, and the manager has footage and a report for each job.
Problems we solve
Grease and Soap Problems We Solve in Port Charlotte
Grease and soap buildup shows up in a few predictable ways. If you recognize any of these, the line is already coated and getting worse.
Ask a pro →↗
Shower pan holds water and drains gurgle
We clear the shower drain body, the trap, and the branch line, then check the vent stack. If the gurgle continues, the vent is blocked and we clear that too. One visit, both problems fixed.
Sour drain odor under the sink
We clean the trap, jet the branch line, and flush with hot water. If the odor is coming from the main, we camera the line and clear the buildup there. The smell is gone when the pipe is clean.
Multiple drains backing up at once
We run a rooter machine or hydro jetting machine through the main, cut the grease and any tree root intrusion, and verify with a sewer camera. This is a same-day emergency call, and we run it 24/7.
Transparent pricing
Grease Clog Removal Pricing in Port Charlotte
$180 - $850 depending on scope
Grease and soap buildup removal in Port Charlotte runs $180 to $450 for a single kitchen or bath line, and $350 to $850 for a main line or heavy commercial grease job. Typical 2026 pricing depends on line length, pipe material, and whether we snake or hydro jet. We quote a range on the phone and confirm it on site before we start. No hidden fees, no surprise add-ons. If the job needs more than we quoted, we tell you why and what it costs before we run the machine.
You are paying for a full clear, not a poke-through. We snake, jet, and camera-verify the line, and you watch the footage. That is why our customers go a year or more without a repeat clog instead of calling someone back every few months.
01Line length and location
A short kitchen branch is quick and cheap. A main line that runs 40 feet to the city connection takes longer and uses more jetting hose and water. That is the biggest driver of price.
02Pipe material
PVC pipe and ABS pipe clear fast. Cast iron pipe is rougher inside and holds more grease, so it takes more time to jet clean. We also use gentler tooling on old cast iron to avoid damage.
03Snaking vs. hydro jetting
A simple snake clear costs less. Hydro jetting costs more because it cleans the full pipe wall and takes longer. On grease jobs, jetting is usually the right call because snaking alone leaves the wall coated.
04Access and fixture type
A kitchen sink with a clean P-trap is easy access. A shower drain behind a tile floor or a commercial floor drain with a heavy grate takes more time. Access affects labor, and labor affects price.
Proof you can check
Licensed, Insured, and Verified
✓
State-Licensed Plumbing ContractorFlorida Department of Business and Professional Regulation
✓
Master Plumber LicenseFlorida Department of Business and Professional Regulation
✓
Backflow Prevention CertificationFlorida Department of Environmental Protection
✓
OSHA Safety CertificationOccupational Safety and Health Administration
✓
EPA WaterSense PartnerU.S. Environmental Protection Agency
Customer reviews
What Port Charlotte Customers Say
★★★★★
“My kitchen sink had been draining slow for weeks and then just stopped. The tech ran a camera and showed me the pipe was almost closed with grease. He jetted it out and it has been perfect for eight months. He also told me to stop pouring bacon grease down the drain, which I did. Fair price, no mess left behind.”
MG
Maria G.Homeowner, Deep Creek
✓ Verified“
★★★★★
“Friday night, three-compartment sink backed up during dinner service. They had a tech out in under an hour with a hydro jetting machine. Cleared the grease line and the floor drain, checked the grease trap, and we were back in service before the rush ended. They now come quarterly so it does not happen again.”
DW
Darnell W.Restaurant Owner, Port Charlotte Town Center
✓ Verified★★★★★
“I manage six rentals and grease clogs were a monthly headache. Port Charlotte DrainCraft jetted the main lines, sent me camera footage of every job, and set up a maintenance schedule. We have not had a single after-hours backup in the last year. That alone paid for the service.”
KT
Karen T.Property Manager, Harbour Heights
✓ VerifiedYou remove it mechanically, not with a bottle of enzyme drain cleaner. A drain snake or rooter machine breaks the core of the clog, then a hydro jetting machine at 3,000 to 4,000 PSI strips the grease and soap scum off the pipe walls. We finish with a sewer camera to confirm the line is clean. Most jobs take 45 to 90 minutes and cost $180 to $450.
Typical 2026 pricing in Port Charlotte runs $180 to $450 for a single kitchen or bath line, and $350 to $850 for a main line or heavy commercial grease job. Cost depends on line length, pipe material, and whether we snake or hydro jet. We quote a range on the phone and confirm it on site before we start.
Cooking oil, bacon fat, butter, salad dressing, and soap scum are the main causes. Grease goes down warm and liquid, then cools and sticks to the pipe wall. Soap film and food bits catch on it and the layer grows. In Port Charlotte, hard water makes soap scum worse, so bath and kitchen lines clog faster here than in softer-water cities.
Port Charlotte DrainCraft does. We are a local, state-licensed plumbing contractor serving Charlotte County with same-day and 24/7 emergency service. We cover Port Charlotte Town Center, Deep Creek, Harbour Heights, Gulf Cove, Rotonda West, and Punta Gorda. Call (941) 307-1926 and we will dispatch a tech with a sewer camera and hydro jetting machine.
More services
Related Drain Services We Offer
Residential Drain CleaningMost grease and soap buildup calls start in a home kitchen or bath. Our residential service covers every fixture on the property, from the kitchen sink to the laundry standpipe, and we camera the main line to make sure the grease has not spread downstream.Explore →
Commercial Drain CleaningRestaurants and commercial kitchens produce far more grease than a home. We handle grease trap cleaning equipment, floor drains, and three-compartment sink lines, and we schedule after-hours service so your kitchen never shuts down during prep.Explore →
Kitchen Sink Drain CleaningThe kitchen sink is where grease and soap buildup starts. We pull the P-trap, snake the branch line, and jet the wall of the pipe clean. If your dishwasher backs up into the sink, that is the same grease clog and we clear both at once.Explore →
Bathroom Sink Drain CleaningSoap scum, toothpaste, and hair build a sticky mat inside bathroom sink lines. We clear it with a drain auger cable and flush the line. Port Charlotte hard water makes this scum harder and faster to form, so bath lines here need attention more often.Explore →Shower Drain CleaningA shower pan that holds water is usually soap scum and hair wrapped around the drain body. We pull the strainer, clear the trap, and jet the branch line. If the drain gurgles after clearing, we check the vent stack too.Explore →
Bathtub Drain CleaningTub drains sit low and catch everything that washes off. We clear the trap and the branch line, then test with a full tub of water. If the line is cast iron pipe, we use gentler tooling so we do not scar the pipe wall.Explore →
Toilet Drain CleaningA toilet that backs up when you run the sink usually means a main line clog, not a toilet clog. We check both. If grease is the cause, we clear the main and camera it so you know the line is open.Explore →
Floor Drain CleaningFloor drains in garages, laundry rooms, and commercial kitchens collect grease and sludge. We clear the trap and jet the run to the main. In restaurants, this is often the first sign that the grease trap needs service.Explore → Ready when you are
Get Grease and Soap Buildup Removal Port Charlotte FL Today
A slow drain becomes a backup, and a backup becomes a mess. Call Port Charlotte DrainCraft at (941) 307-1926 for same-day grease and soap buildup removal. We are a state-licensed plumbing contractor serving Charlotte County, and we show you the camera footage before we leave.
Call Now (941) 307-1926 →
Request an appointment
Contact Port Charlotte DrainCraft
Call us at (941) 307-1926 or email info@portcharlottedraincraft.com. We're available 24/7 for emergencies and schedule regular appointments Monday through Friday. Our office is in Port Charlotte, and we serve all of Charlotte County.
Call anytime(941) 307-1926Email the officeinfo@draincleaningportcharlottefl.com
Office hoursOpen 24 hours · 7 days a week